Our 3D printing technologies.
Resin, filament and nylon powder through one shop and one point of contact, so your part is made on the right process in the right material — not whatever happens to be free.
Stereolithography
SLA uses a precision laser to cure liquid resin layer by layer into solid parts. The process produces exceptionally smooth surfaces, fine feature resolution, and sharp detail, making it ideal for visual models, molds, medical components, and applications where surface quality is critical.
- Build Volume353 × 196 × 350 mm
- Layer Height25–100 microns
- Tolerance±0.1 mm typical
Form 4BL
Fused Deposition Modeling
FDM builds parts by extruding thermoplastic filament layer by layer in a heated, enclosed chamber. It is the fastest and most cost-effective route to durable parts, well suited to functional prototypes, jigs and fixtures, housings, and low-volume production across a fleet of machines.
- Build VolumeUp to 1 m³ (large-format)
- Layer Height100–300 microns
- Tolerance±0.2 mm typical
Bambu Lab H2S
Selective Laser Sintering
SLS uses a high-powered laser to fuse layers of powdered polymer into solid parts. Because parts are supported by surrounding powder, SLS enables complex geometries, internal features, and moving assemblies without support structures, making it well suited for durable, production-grade components.
- Build Volume165 × 165 × 300 mm
- Layer Height50–200 microns
- Tolerance±0.3 mm / ±0.3%
PA12 Nylon
