Massing models, presentation pieces, trade-show props and display hardware — printed at real scale and finished in-house, so the model does the talking instead of the drawings.
Site and building studies at scale, printed in sections and blended so the joints disappear under paint.
Client-facing pieces finished and painted for boardrooms, planning meetings and competition boards.
Stands, plinths, signage and props sized for the booth rather than ordered from a catalogue.
Contour terrain, landscaping and surrounding blocks built from survey or GIS data.
Oversized and one-off pieces for film, photography and window displays.
Handles, trims, fittings and detail samples to hold in your hand before specifying them.
Resin, filament and nylon powder through one shop and one point of contact — so your part is made on the right process in the right material, not whatever happens to be free.
Form 4BL
SLA uses a precision laser to cure liquid resin layer by layer into solid parts. The process produces exceptionally smooth surfaces, fine feature resolution, and sharp detail, making it ideal for visual models, molds, medical components, and applications where surface quality is critical.
Bambu Lab H2S
FDM builds parts by extruding thermoplastic filament layer by layer in a heated, enclosed chamber. It is the fastest and most cost-effective route to durable parts, well suited to functional prototypes, jigs and fixtures, housings, and low-volume production across a fleet of machines.
PA12 Nylon
SLS uses a high-powered laser to fuse layers of powdered polymer into solid parts. Because parts are supported by surrounding powder, SLS enables complex geometries, internal features, and moving assemblies without support structures, making it well suited for durable, production-grade components.
Book twenty minutes with an engineer to talk through the requirement — material, tolerance, volume, certification — before anything gets modelled or quoted.