Resin, filament and nylon powder, all through one shop. Most people arrive knowing what the part has to do rather than which machine should make it — so start with the requirement and work back to the process.
Still unsure? Send the file — we’ll tell you the best route, even when it’s the cheaper one.
Every part we make comes off one of these. The specs underneath each are the ones that usually decide it.
Form 4BL
SLA uses a precision laser to cure liquid resin layer by layer into solid parts. The process produces exceptionally smooth surfaces, fine feature resolution, and sharp detail, making it ideal for visual models, molds, medical components, and applications where surface quality is critical.
Bambu Lab H2S
FDM builds parts by extruding thermoplastic filament layer by layer in a heated, enclosed chamber. It is the fastest and most cost-effective route to durable parts, well suited to functional prototypes, jigs and fixtures, housings, and low-volume production across a fleet of machines.
PA12 Nylon
SLS uses a high-powered laser to fuse layers of powdered polymer into solid parts. Because parts are supported by surrounding powder, SLS enables complex geometries, internal features, and moving assemblies without support structures, making it well suited for durable, production-grade components.
Nylons, polycarbonate, PPS and carbon-filled grades on high-temperature machines — for parts facing heat, chemicals, or structural load.
Explore →
Oversized parts up to 1000 mm printed in a single piece — no bonding seams, no assembly, no joint to fail first.
Explore →Upload a file for a fast quote, or talk it through with an engineer.